BabyDan Premier, white, 1 extension - Baby safety

Baby Dan safety gate in classic design. - Fits in openings from 73,5 cm (29"), and with extensions the gate can be installed in openings up to 183 cm (72"). - Pressure fitted, can easily be mounted without the use of any tools or wall cups. - IMPORTANT: If the correct pressure cannot be obtained or if the gate is used with more than 2 extensions, it will however be necessary to use the enclosed wall cups, which need to be screwed into the wall. - Built in safety indicator, which shows if the gate has been properly mounted. - Can be operated with one hand and opens both ways. - Made from Steel Please note: As we care for the environment and strive to reduce our resource consumption, this box contains only the parts that you need for the size specified. This means that this gate only fits in openings within the specified opening size range (eg 73.5 - 79.6 cm/28.94”-31.34”). If the gate is to be used for an opening that is narrower or wider than the opening size range of the gate, it can be extended or shortened/reduced, but separate parts must be used for this. They are not included in the box. Therefore, we always recommend that you find exactly the gate size, that fits with the width of the opening it is meant to cover. If you already have a BabyDan Premier gate that you need to reduce or extend, you can buy one or more BabyDan Extend-A-Gate or BabyDan Reduce-A-Gate kits that make it possible to shorten the gate down to 73.5 cm/29” or extend it up to 183 cm/72”. Please contact our customer service at servicedk@babydan.dk for advice and guidance on which parts you need to lengthen or shorten your gate.